What Does "Ohms Too High" Mean?
The "Ohms Too High" error typically occurs when the resistance of the coil in your vape tank exceeds the upper limit supported by your device. In simpler terms, it means that the coil you've installed has a resistance that is too high for your mod to handle. This error message is commonly encountered in variable wattage or temperature control devices that have a resistance range limit.
Causes of "Ohms Too High" Error:
Incorrect Coil Resistance: One of the most common causes of the "Ohms Too High" error is using a coil with a resistance that exceeds the capabilities of your device. This can happen if you mistakenly install a coil with a higher resistance rating than what your mod supports.
Coil Connection Issues: Poor connection between the coil and the device can also trigger the "Ohms Too High" error. Make sure that the coil is properly seated and securely screwed into place to establish a stable connection.
Dirty or Damaged Contacts: Dirt, e-liquid residue, or damage to the device's contacts can interfere with the electrical connection between the coil and the mod, leading to resistance reading errors.
Faulty Coil: In some cases, the coil itself may be faulty or damaged, causing it to register an incorrect resistance reading and triggering the "Ohms Too High" error.
How to Fix "Ohms Too High" Error:
Check Coil Resistance: Start by verifying the resistance of the coil you've installed. Refer to the coil's specifications or use a resistance checker to ensure that it falls within the supported range of your device. If the resistance is too high, replace the coil with one that is compatible with your mod.
Clean and Inspect Connections: Inspect the connections between the coil, tank, and mod for any signs of dirt, debris, or damage. Clean the contacts using a cotton swab dipped in isopropyl alcohol and ensure that they are making solid contact.
Tighten Coil and Tank: Ensure that the coil is securely screwed into the base of the tank and that the tank is properly attached to the mod. Loose connections can result in unstable resistance readings and trigger error messages.
Reset Device: If cleaning and tightening connections don't resolve the issue, try resetting your device to its factory settings. Consult your device's user manual for instructions on how to perform a reset.
Replace Coil: If none of the above steps resolve the "Ohms Too High" error, consider replacing the coil with a new one. Faulty or damaged coils can cause erratic resistance readings and lead to error messages.
Preventing "Ohms Too High" Error:
Use Compatible Coils: Always ensure that the coils you use are compatible with your device and fall within its supported resistance range. Refer to the device's user manual or consult with a knowledgeable Vape Shop Online Las Vegas like Vapor Rage for guidance on compatible coils.
Keep Contacts Clean: Regularly clean the contacts on your device, tank, and coils to maintain optimal conductivity and prevent resistance reading errors. Avoid over-tightening connections, as this can damage the threads and lead to connectivity issues.
Inspect Coils Before Installation: Before installing a new coil, inspect it for any signs of damage or defects. Look for frayed wires, loose connections, or irregularities in the coil's structure that may affect its performance.
Monitor Device Performance: Pay attention to any changes in your device's performance, such as sudden resistance fluctuations or error messages. Promptly address any issues to prevent potential damage to your device or safety hazards.
In conclusion, encountering the "Ohms Too High" error on your vape device can be frustrating, but it's essential to understand the underlying causes and how to troubleshoot them effectively. By following the tips outlined in this guide and seeking assistance from reputable vape shops like Vapor Rage, you can ensure a smooth and enjoyable vaping experience without encountering resistance reading errors. Remember to prioritize safety and proper maintenance to prolong the lifespan of your vape device and coils.
For More Info-
